Product Finder Index
Orders & Payment
AB Slotsport.Com
Information Site
Information Site
A CONTROLLER WITH SERIOUS ATTITUDE!
A JOINT PROJECT FROM Fritz Kopriwa (of Telechoke fame) & Jiri Micek (manufacturer of the Pro 3 hand controller.)
The TELECHOKE 2 CONTROLLER
This Controller features all the requirements that these two experienced racers could think of!
This integrated unit features almost everything you could want from a controller (although it runs so cool it definitely won’t make toast!)
THE HANDLE
The conventional Pro 3 adjustments for “Chip” have now been extended and feature 9 chips of the following values, 140, 127.5, 97.5, 82.5, 67.5, 60, 50, 40 &32.5 ohms.
Brakes feature a 12 step rotary switch adjustment.
Sensitivity is adjusted by a 12 step rotary switch.
Voltage control is by 4 step rotary switch giving 0, 1, 1.6 or 2.8 volts of reduction.
Choke control is by a 12 step switch giving 0, 1,2,3,4,6,8,10.12.14.16.18 feet of choke.
The controller features a new wiper assembly and also a gold plated wiper band.
THE BOX
The electronics are housed in a Kopriwa Telechoke housing with monster heat sink, twin fan cooling, twin transistors, relay operated wire chokes and voltage control circuits, Auto off restable overload and LED displays which show track voltage,, choke and blast relay settings.
Assembled in Switzerland to the highest standards, this controller will run ANY slot car on the Planet! These controllers are built to special order only. (delivery approx. 2 months).
£525.00
The TELECHOKE 2 CONTROLLER
This Controller features all the requirements that these two experienced racers could think of!
This integrated unit features almost everything you could want from a controller (although it runs so cool it definitely won’t make toast!)
THE HANDLE
The conventional Pro 3 adjustments for “Chip” have now been extended and feature 9 chips of the following values, 140, 127.5, 97.5, 82.5, 67.5, 60, 50, 40 &32.5 ohms.
Brakes feature a 12 step rotary switch adjustment.
Sensitivity is adjusted by a 12 step rotary switch.
Voltage control is by 4 step rotary switch giving 0, 1, 1.6 or 2.8 volts of reduction.
Choke control is by a 12 step switch giving 0, 1,2,3,4,6,8,10.12.14.16.18 feet of choke.
The controller features a new wiper assembly and also a gold plated wiper band.
THE BOX
The electronics are housed in a Kopriwa Telechoke housing with monster heat sink, twin fan cooling, twin transistors, relay operated wire chokes and voltage control circuits, Auto off restable overload and LED displays which show track voltage,, choke and blast relay settings.
Assembled in Switzerland to the highest standards, this controller will run ANY slot car on the Planet! These controllers are built to special order only. (delivery approx. 2 months).
£525.00
KOPRIWA CONTROLLERS & PRO CONTROLLERS
The controller also features 2 options for blast relay operation
REDUCTION will allow the voltage reduction to be enabled or disabled at full power.
The MASTER will allow the chokes to be enabled or disabled at full power.
Illuminated display gives readouts for track power and choke setting, flashing led’s indicate blast relay status.
REDUCTION will allow the voltage reduction to be enabled or disabled at full power.
The MASTER will allow the chokes to be enabled or disabled at full power.
Illuminated display gives readouts for track power and choke setting, flashing led’s indicate blast relay status.
PRO CONTROLLERS
In limited quantities.
The PRO-s Controller, complete with Chip set and spare Fuse. Massive cooling fan and improved circuit board.
£255.00 + carriage.
UK adaptor c/w wired 3pin plug and colour coded Banana sockets £5.90
The PRO-s Controller, complete with Chip set and spare Fuse. Massive cooling fan and improved circuit board.
£255.00 + carriage.
UK adaptor c/w wired 3pin plug and colour coded Banana sockets £5.90
In limited quantities.
The Pro 3 Controller from Micek in Czech Republic, complete with chip set and chipset storage box. A great quality, reliable controller, suitable for all types of slot racing applications.
£265.00 + carriage
UK Adaptor c/w wired 3 pin plug and colour coded banana sockets £5.90
The Pro 3 Controller from Micek in Czech Republic, complete with chip set and chipset storage box. A great quality, reliable controller, suitable for all types of slot racing applications.
£265.00 + carriage
UK Adaptor c/w wired 3 pin plug and colour coded banana sockets £5.90
Now Available & IN STOCK!
For Pro 3 controllers -
Blank chip boards, ideal if you want to make up custom resistor boards for your Pro 3 controller £5.20 each
For Pro 3 controllers -
Blank chip boards, ideal if you want to make up custom resistor boards for your Pro 3 controller £5.20 each
NOW AVAILABLE FROM STOCK!
No need to purchase expensive full cable drums !
High Quality, Replacement multi core cable suitable for a range of applications including Pro Controllers, Kopriwa controllers, lap counter and relay controls.
All Cable is flexible & has high spec, .25mm Sq. multistrand colour coded cores. Outer insulation is Grey or Black dependant on size. Price is per Mtr, cut length
8 Core Cable £2.05
12 Core Cable £2.35
16 Core Cable £2.60
No need to purchase expensive full cable drums !
High Quality, Replacement multi core cable suitable for a range of applications including Pro Controllers, Kopriwa controllers, lap counter and relay controls.
All Cable is flexible & has high spec, .25mm Sq. multistrand colour coded cores. Outer insulation is Grey or Black dependant on size. Price is per Mtr, cut length
8 Core Cable £2.05
12 Core Cable £2.35
16 Core Cable £2.60