Product Finder Index
Orders & Payment
AB Slotsport.Com
Information Site
Information Site
PROSLOT MOTORS
C-CAN MOTORS
PS-723 Group 12 C-can Motor £28.97
PS-723D Group 12 C-can Motor with drill/reamer blank £31.38
PS-728 USRA Spec 15 C-can Motor £28.97
PS-728A USRA Spec 15 C-can Motor with drill/reamer blank £31.38
PS-729B Contender C-can Motor (balanced) £28.55
PS-730 Group 20 C-can Motor £28.97
PS-731 Group 20 Quad C-can Motor £39.86
PS-732 Super Wasp C-can Motor £28.55
PS-734 Super 16C Motor It's 5.5 grams lighter than imported S16d motors £24.50
* All C-Can motors are available with MEGA II magnets. Add MEGA to the part number
BLUEPRINTED C-CAN MOTORS
PS-740 Blueprinted Grp 12 motor £41.75
PS-741 Blueprinted Super Wasp motor £39.20
PS-742 Blueprinted Grp 20 motor £40.85
PS-743 Blueprinted Quad 20 motor Complete with shunted brushes and spring insulation. £54.80
Feature our lightweight C-can, matched SMQ or HEQ magnets, lightweight hardware, new oilites and Goldust Brushes. Add £16.75 for ballbearing motors.
* All C-Can motors are available with MEGA II magnets. Add MEGA to the part number.
16D & S16 Motors
pS-744 "Twister can with DM2 Magnets" Blueprinted motor with our PS-706 American Made 16D. Armature unbalanced. £23.95
PS-745 "Twister can with DM2 Magnets" Blueprinted motor with our PS-706 American Made 16D. Armature balanced. £29.40
PS-746 "Twister can with DM2 Magnets" Blueprinted motor with our PS-700 American Made S16D. Armature balanced. £29.40
Specify Timing of 25, 38, 45 or 50 degrees. All motors include Straightened Can, soldered oilite, matched DM2 magnets, Golddust Brushes, Champion Light Springs, Aligned and Honed brush hoods and are fully tested on our power supply.
MAGNETS
PS-905 "SMQ" Single Magnet Quads Our new one piece c-can magnets performs like a quad magnet £8.00
PS-906 "SMQ" Matched Magnets £11.35
PS-907 "HEQ" High Energy Quad Magnets Used in our Top Gun & Quad 20 Motors and setups. Feature long tips for added torque. £18.60
PS-912 Mega IIl Matched "Blue Dot" Magnets Same profile and dimensions as Mura magnets but 450 long. £10.99
PS-640 Magnet clips (per pair) £0.40
PARTS
PS-610 Super Light front wheels Mount on a straight pin or piano wire £1.25 .
PS-611 Teflon Spring Insulation Pack of 6 £4.98
PS-613 Silver Shunt Wire Pack of 6 £4.98
PS-614 Silver Shunt Wire Bulk 10 Feet £6.75
MOTOR PARTS
PS-720 Box Stock Setup Built with our standard C-Can. £16.85
PS-723D Group 12 C-can Motor with drill/reamer blank £31.38
PS-728 USRA Spec 15 C-can Motor £28.97
PS-728A USRA Spec 15 C-can Motor with drill/reamer blank £31.38
PS-729B Contender C-can Motor (balanced) £28.55
PS-730 Group 20 C-can Motor £28.97
PS-731 Group 20 Quad C-can Motor £39.86
PS-732 Super Wasp C-can Motor £28.55
PS-734 Super 16C Motor It's 5.5 grams lighter than imported S16d motors £24.50
* All C-Can motors are available with MEGA II magnets. Add MEGA to the part number
BLUEPRINTED C-CAN MOTORS
PS-740 Blueprinted Grp 12 motor £41.75
PS-741 Blueprinted Super Wasp motor £39.20
PS-742 Blueprinted Grp 20 motor £40.85
PS-743 Blueprinted Quad 20 motor Complete with shunted brushes and spring insulation. £54.80
Feature our lightweight C-can, matched SMQ or HEQ magnets, lightweight hardware, new oilites and Goldust Brushes. Add £16.75 for ballbearing motors.
* All C-Can motors are available with MEGA II magnets. Add MEGA to the part number.
16D & S16 Motors
pS-744 "Twister can with DM2 Magnets" Blueprinted motor with our PS-706 American Made 16D. Armature unbalanced. £23.95
PS-745 "Twister can with DM2 Magnets" Blueprinted motor with our PS-706 American Made 16D. Armature balanced. £29.40
PS-746 "Twister can with DM2 Magnets" Blueprinted motor with our PS-700 American Made S16D. Armature balanced. £29.40
Specify Timing of 25, 38, 45 or 50 degrees. All motors include Straightened Can, soldered oilite, matched DM2 magnets, Golddust Brushes, Champion Light Springs, Aligned and Honed brush hoods and are fully tested on our power supply.
MAGNETS
PS-905 "SMQ" Single Magnet Quads Our new one piece c-can magnets performs like a quad magnet £8.00
PS-906 "SMQ" Matched Magnets £11.35
PS-907 "HEQ" High Energy Quad Magnets Used in our Top Gun & Quad 20 Motors and setups. Feature long tips for added torque. £18.60
PS-912 Mega IIl Matched "Blue Dot" Magnets Same profile and dimensions as Mura magnets but 450 long. £10.99
PS-640 Magnet clips (per pair) £0.40
PARTS
PS-610 Super Light front wheels Mount on a straight pin or piano wire £1.25 .
PS-611 Teflon Spring Insulation Pack of 6 £4.98
PS-613 Silver Shunt Wire Pack of 6 £4.98
PS-614 Silver Shunt Wire Bulk 10 Feet £6.75
MOTOR PARTS
PS-720 Box Stock Setup Built with our standard C-Can. £16.85
GOLDUST PRO BRUSHES
PS-900 Goldust Pro Motor Brushes Six pair per card £17.60
PS-901 Goldust Pro Motor Brushes Bulk pack 50 pair (2.60 pr.) £130.00
Motor Cans (new 2004 type)
PS-714 Our standard C-can/with oilite (.023 thick can) £6.35
PS-749 C-can set-up kit without magnets £14.95
Box Stock Endbells and Parts
PS-618 Assembled Endbell Undrilled £8.40
PS-641 Brush Hood & Heat Sinks - Our new lightweight and new design c-can hardware £3.50
PS-642 Hardware set complete with oilite, spring cups and screws £5.05
PS-643 Complete Endbell Kit - includes endbell, hardware, spring cups, oilite and screws £7.15
PS-711 Endbell with oilite bushing £3.25
PS-715 Set of 8 self tapping hardware or endbell screws (.8.) 3.30
PS-716 2 x 5 oilites (12) £5.05
PS-717 Set of 8 self starting T5 Torx Can and endbell screws. (As used in our motors) £1.70
PS-717B Bulk pack of 50 Self starting T5 Torx Can and endbell screws £8.39
Box Stock and Super 16D Replacement
ARMATURES
2004 M Blank armatures
PS-700 Super 16D Replacement .490 Stack, .520 Dia.- 25 or 38 degrees £15.95
PS-701* X-12 Box Stock .513 £18.50
PS-701D or MD X-12 Box Stock .513 with reamer/drill blank £21.85
PS-702 USRA Spec 15 .Arm .513 £18.50
PS-702D USRA Spec 15 .Arm .513 with drill/reamer blank £21.85
PS-703 G20 box stock £19.25
PS-704 Super Wasp .513 £17.20
PS-705 Contender .513 £17.20
Standard length is C-can length .
Some armatures still available in Intruder and Millennium blank types.
* If you would like your PS-701 armatures in diameters larger than .513, add an L to the part number and specifiy diameter desired.
PS-204 X-12 .500 £24.20
Stock timing for G12 arms is
38,42 or 45 degree.
Ultra Short Scale Armatures,
014 or .007
Also available with our new EDM comm. (add EDM after part number). £41.95
PS-109A .665 long .250 stacks £37.75
PS-109B .750 long .300 stacks £37.75
When ordering with .007 material price is £39.45 and £43.60 EDM
Available in diameters from .450 to .500
A=31T27, B=33T27, C=35T28, D=38T28, E=40T28, F=26T26, G=26T25, H=Custom
For Proslot tools see the tools page.
Available NOW!
Custom Aluminium endbells drilled, tapped and anodised to specifically suit Proslot 2003 cans and configured to take Proslot/RJR brush hardware £14.50.
These endbells are also suitable for the RJR 2004 set up.
Aluminium Endbells for the Proslot 2004 set-up now available in limited quantities @ £15.00
PS-900 Goldust Pro Motor Brushes Six pair per card £17.60
PS-901 Goldust Pro Motor Brushes Bulk pack 50 pair (2.60 pr.) £130.00
Motor Cans (new 2004 type)
PS-714 Our standard C-can/with oilite (.023 thick can) £6.35
PS-749 C-can set-up kit without magnets £14.95
Box Stock Endbells and Parts
PS-618 Assembled Endbell Undrilled £8.40
PS-641 Brush Hood & Heat Sinks - Our new lightweight and new design c-can hardware £3.50
PS-642 Hardware set complete with oilite, spring cups and screws £5.05
PS-643 Complete Endbell Kit - includes endbell, hardware, spring cups, oilite and screws £7.15
PS-711 Endbell with oilite bushing £3.25
PS-715 Set of 8 self tapping hardware or endbell screws (.8.) 3.30
PS-716 2 x 5 oilites (12) £5.05
PS-717 Set of 8 self starting T5 Torx Can and endbell screws. (As used in our motors) £1.70
PS-717B Bulk pack of 50 Self starting T5 Torx Can and endbell screws £8.39
Box Stock and Super 16D Replacement
ARMATURES
2004 M Blank armatures
PS-700 Super 16D Replacement .490 Stack, .520 Dia.- 25 or 38 degrees £15.95
PS-701* X-12 Box Stock .513 £18.50
PS-701D or MD X-12 Box Stock .513 with reamer/drill blank £21.85
PS-702 USRA Spec 15 .Arm .513 £18.50
PS-702D USRA Spec 15 .Arm .513 with drill/reamer blank £21.85
PS-703 G20 box stock £19.25
PS-704 Super Wasp .513 £17.20
PS-705 Contender .513 £17.20
Standard length is C-can length .
Some armatures still available in Intruder and Millennium blank types.
* If you would like your PS-701 armatures in diameters larger than .513, add an L to the part number and specifiy diameter desired.
PS-204 X-12 .500 £24.20
Stock timing for G12 arms is
38,42 or 45 degree.
Ultra Short Scale Armatures,
014 or .007
Also available with our new EDM comm. (add EDM after part number). £41.95
PS-109A .665 long .250 stacks £37.75
PS-109B .750 long .300 stacks £37.75
When ordering with .007 material price is £39.45 and £43.60 EDM
Available in diameters from .450 to .500
A=31T27, B=33T27, C=35T28, D=38T28, E=40T28, F=26T26, G=26T25, H=Custom
For Proslot tools see the tools page.
Available NOW!
Custom Aluminium endbells drilled, tapped and anodised to specifically suit Proslot 2003 cans and configured to take Proslot/RJR brush hardware £14.50.
These endbells are also suitable for the RJR 2004 set up.
Aluminium Endbells for the Proslot 2004 set-up now available in limited quantities @ £15.00
The all new
PROSLOT SPEED FX
Super 16D motor, now ex stock @ £12.25
Also available as an AB Pre-conditioned motor @ £17.25
PROSLOT SPEED FX
Super 16D motor, now ex stock @ £12.25
Also available as an AB Pre-conditioned motor @ £17.25